Cationic Polyacrylamide

Cationic Polyacrylamide (CPAM) is formed by copolymerization of cationic monomer and acrylamide monomer. It is a water-soluble linear polymeric flocculant. It is mainly used in flocculation and sedimentation of sewage and sludge dewatering and so on.

Specification

Appearance White powder Solid content powder ≥88%

Solid content ≥88% Molecular weight (million)2-10

Molecular weight (million)2-10 Cationic Charge 0-75%

Cationic Charge 0-75% Dissolving time (minute)45-90

Dissolving time (minute)45-90

Benefits

1.Economical and achieve good effects at low dosage. 2.Significantly improve the sludge production efficiency and reduce the moisture content of sludge cake. 3.Increase the settling rate of suspended solids during the solid-liquid separation in sewage treatment process. 4.Highly effective in a wide PH range(2-9), it is capable of treating waste water and sludge under weak acidic condition.

Application Areas

1.Sewage flocculation, sedimentation and flotation 2.Sludge dewatering (suitable for belt filter press, plate and frame filter press, centrifuge, etc.） 3.Retention aid and filter aid for paper making. 4.River dredging 5.Used in minerals selection production and sewage disposal 6.Used in the production of manufactured sand

Notes

Non-toxic

Wash your hands immediately

Keep dry

Premade solution of liquid polyacrylamide is not suitable for long storage (exceed 24 hours)

The recommended pH value for dissolved water is 6-9 1.Non-toxic, easily soluble in water and easily moisture absorption to caking. 2.Splashes on hand and skin should be washed off with water immediately. 3.Proper storage temperature : 5℃~40℃, should be stored in cool and dry place. 4.Prepared liquid polyacrylamide is not suitable for long storage. The flocculating effect will decrease in 24 hours. 5.Low-hardness water with neutral PH (range 6-9) is suggested to dissolve polyacrylamide. Using underground water and recycled water would decrease the flocculating effect.