Emulsion Polyacrylamide

As a new flocculant using the microemulsion process,in polymerization,a special wall-breaking technology,emulsion polyacrylamide is characterized by high conversion rate and stability,multiple functions, quick dissolution, etc. It has a neutral PH value,the sludge treated by it can be reused for composting, brick making, etc. The filtrate obtained after treatment by it is clear and the mud cakes obtained have low water contents, helping cut down the overall treatment cost.

Specification

Milky or colorless liquid Solid content 40%±2

Solid content 40%±2 Viscosity 3-6CP.S

Viscosity 3-6CP.S PH value 4-8

PH value 4-8 Dissolving time (minute)5-10

Dissolving time (minute)5-10

Benefits

1.Excellent flocculation effect ,quick sedimentation and economical low dosage levels 2.High level of water clarification 3.Wide PH range of application （2-14） 4.Great mud water separation effect and water filtration performance and the low moisture content of treated sludge 5.Good compatibility with inorganic coagulant

Application Areas

1.For sewage flocculation and sedimentation treatment 2.Sludge dewatering 3.Oil industry 4.Minerals selection production and sewage disposal 5.Treatment in the aluminum oxide production field

Notes

Non-toxic

Wash your hands immediately

Keep dry

Premade solution of liquid polyacrylamide is not suitable for long storage (exceed 24 hours)

The recommended pH value for dissolved water is 6-9 1.Non-toxic, easily soluble in water and easily moisture absorption to caking. 2.Splashes on hand and skin should be washed off with water immediately. 3.Proper storage temperature : 5℃~40℃, should be stored in cool and dry place. 4.Prepared liquid polyacrylamide is not suitable for long storage. The flocculating effect will decrease in 24 hours. 5.Low-hardness water with neutral PH (range 6-9) is suggested to dissolve polyacrylamide. Using underground water and recycled water would decrease the flocculating effect.